High Speed 4 Color 1000mm Flexible Printing Machine - - Products

Summary:

Characteristic:
The main detailed configuration list
1, the main motor, frequency conversion motor: Taiwan European nations
2, motor transport ink: four European nations in Taiwan
3, host inverter: 1 set (shenzhen weichuang)
4, fan: jiangsu
5, aluminum guide roll (Ryan BaiXiao)
6, ceramic anilox roll: color a (produced in Shanghai, China)
7, low-voltage electrical appliances: (schneider)
8, switch: France schneider)
9, electrical control box: 1 set (sell)
10, 1 set of main frame (sell)
11, the whole machine casting:
12, pneumatic components: (kelly)
13, automatic tension: realtek
14, photoelectric correction: realtek
15, with closed-end scraping blade
16, automatic feeding and automatic
17, backrest friction winding
18 and still picture: game
19. Motor moving around 4 pieces
20. Motor moving up and down 4 pieces
21. Reverse wash ink four

Model	High Speed 4 Color 1000mm Flexible Printing Machine
Printing color	Four color
Max raw material width	1000mm
Max raw material length	235-1200mm
Max printing width	960mm
Max machine speed	150M/min
Max printing speed	Membrane (150 m / 130 m/min paper points note: adopt static picture detection system can better control the error
Accuracy of registrasio	vertical±0.15mm(manual) horizontal±0.15mm(manual)
unwinder/ rewinder diameter	φ1000 mm unwinder/ rewinder paper tube/rubber tube: φ76 mm(inner diameter)
printing way	mechanical adjust
printing plate lifting system	Automatic Hydraulic cylinder control printing roller.
anilox roll	it adopts imported ceramic anilox roller
tension systems	unwinding adopts automatic tension control system, 10 kg of magnetic powder.
rewinder/unwinder	clamp material in air shaft,invert with analog quantity controlled,one 2.2kw motor equipped
EPC way	automatic photoelectric
Drying way	electric heat
HEATING POWER	26KW （DOULD HEATING SET IN PARTICULAR， IT WILL MAKE drying FASTER）
BLOWER	2.2x2个
Main motor	7.5kw
main inverter	adjust the speed by inverter
ink motor	gear motor（0.6kw X4 ）
total power	44KW
total power	7000x2600x4000
Bearing	Japan NSK oneway bearing ,ASNU aluminum alloy guide pulley for hard oxidation, dynamic balance, static balance treatment

The quality and performance of the equipment continue to improve, and the appearance, technical parameters and characteristics of the machine are subject to change without notice