SIX COLOR FLEXOGRAPHIC PRINTING MACHINE - - Products - ZheJiang ZHUXIN Machinery CO.,LTD

Summary:

Characteristic:
1. simple operation, convenient color registration and long service life.
2. adopt motor, frequency conversion speed regulation, save electricity and run little fluctuation.
3. automatic stop inking motor, automatic start inking device.
4. using synchronous belt drive, printing size is accurate.
5. there are two sets of ventilation and heating devices. The central heating control system and grouping control are adopted.
6. the low rollers are made of special steel and treated by special process, and electroplated with 10 wire thick hard chromium protective layer.
7 aluminum alloy guide wheel for hard oxidation, dynamic balance and static balance treatment.
8 equipped with cold air molding bellows, it can effectively prevent defects such as adhesion after printing.
9. printing image clarity and strong sense of hierarchy

Model	SIX COLOR FLEXOGRAPHIC PRINTING MACHINE
Printing color	SIX color
Max raw material width	1200mm
Max printing width	1160mm
Max machine speed	140M/min
Max printing speed	30-120 M / min
Accuracy of registrasio	longitudinal + 0.15mm (manual) transverse + 0.15mm (manual)
unwinder/ rewinder diameter	φ1000 mm unwinder/ rewinder paper tube/rubber tube: φ76 mm(inner diameter)
printing way	mechanical adjustment
Landing versio	automatic hydraulic lifting and landing
anilox roll	6 pieces of ceramic roller.
tension systems	automatic feeding and discharging system is controlled by automatic tension detection system.
rewinder/unwinder	using air shaft clamping material, 10 kg magnetic powder 2 sets, and equipped with a 2.2 kW motor combination take-up
EPC way	automatic photoelectric correction system
Drying way	electric heat
HEATING POWER	15KW (special double side blowing, faster drying)
BLOWER	1.1KW * 2 1.5KW * 2.
Main motor	5.5kw
main inverter	speed regulation by frequency converter
ink motor	gear motor（0.2kw ）
total power	35KW
total power	long 5.8M * wide 3.6M * high 3.5M
Bearing	Japan NSK oneway bearing ,ASNU aluminum alloy guide pulley for hard oxidation, dynamic balance, static balance treatment

Main detailed configuration list

1. Main motor (frequency conversion motor): Taiwan
2, ink motor: 1 pieces of Taiwan.
3, host inverter: 1 sets (Japan, Sichuan)
4, fan: 2 pieces of Shanghai
5, aluminum guide roller: (Ruian Bai Xiao)
6, ceramic belongs to anilox: one color (Italy).
7, cots: one color: (Zhejiang)
8, low voltage electrical appliances: (Schneider)
9, switch: (Schneider)
10, electrical control box: 1 sets (self produced)
11, main frame 1 group (self produced)
12. Whole machine castings:
13, pneumatic components: (Taiwan, Asia)
14, computer screen: Taiwan
15, automatic tension: MITSUBISHI, Japan
16, photoelectric correction: Italy
17, closed double blade scraper

The quality and performance of the equipment continue to improve, and the appearance, technical parameters and characteristics of the machine are subject to change without notice