SJ-AHigh and low pressure film blowing machine - - Products

Summary:
The fuselage is square steel frame, traction belt frequency conversion, friction single winding, lifting, etc. Suitable for blowing high and low pressure polyethylene industrial film and agricultural film.
Characteristic:

model	SJ-A45	SJ-A50	SJ-A55	SJ-A60	SJ-A65
General materials	HDPE LDPE LLDPE	HDPE LDPE LLDPE	HDPE LDPE LLDPE	HDPE LDPE LLDPE	HDPE LDPE LLDPE
Product width (mm)	100-500	300-600	400-800	500-1000mm	600-1200mm
Product thickness (mm)	0.09-0.10	0.09-0.10	0.09-0.15	0.09-0.15	0.09-0.15
Product thickness (mm)	0.02-0.15	0.02-0.15	0.03-0.15	0.03-0.15	0.03-0.15
Maximum output (kg/h)	thirty-five	forty	fifty	fifty-five	fifty-five
Maximum output (kg/h)	forty-five	fifty	sixty	seventy	seventy
Extruder				Extruder	Extruder
Screw diameter	Φ forty-five	φ fifty	Φ fifty-five	Φ sixty	Φ sixty-five
Length diameter ratio of screw	28:1/30:1	28:1/30:1	28:1/30:1	28:1/30:1	28:1/30:1
Screw material	Sacm-645/38 crmoala			Sacm-645/38 crmoala	Sacm-645/38 crmoala
Barrel material	Sacm-645/38 crmoala			Sacm-645/38 crmoala	Sacm-645/38 crmoala
Barrel cooling	370W*1	370W*2	370W*2	370W*2	370W*2
Host power	11kw	15kw*	18.5kw	22kw	22kw
Barrel temperature control	three	three	three	four	four
Average power consumption	12kw	18kw	20kw	25kw	30kw
Die head				Die head	Die head
Die opening	Φ sixty	Φ eighty	Φ eighty

The quality and performance of the equipment continue to improve, and the appearance, technical parameters and characteristics of the machine are subject to change without notice