SJ-PPlastic film blowing gravure printing unit - - Products

Summary:
The machine body is a square steel frame, and the traction motor is equipped with frequency conversion. Friction sheet winding, lifting, etc. Suitable for blowing high and low pressure polyethylene industrial film and agricultural film. Continuous printing of various plastic films. Cloth and thin leather, packaging products, single and double-sided printing is completed at one time. 360 degree plate alignment device, which does not affect the elongation of the film accurately. It can adjust the printing color at any time. The far-infrared tube drying device can dry 50%/min, and the image is clear and exquisite. (gravure printing machine can also be replaced by flexible printing machine)
Characteristic:

model	SJ-P45	SJ-P50	SJ-P55	SJ-P60	SJ-P65
General materials	HDPE LDPE LLDPE	HDPE LDPE LLDPE	HDPE LDPE LLDPE	HDPE LDPE LLDPE	HDPE LDPE LLDPE
Product width (mm)	100-500	300-600	400-800	500-1000mm	600-1200mm
Product thickness (mm)	0.09-0.10	0.09-0.10	0.09-0.15	0.09-0.15	0.09-0.15
Product thickness (mm)	0.02-0.15	0.02-0.15	0.03-0.15	0.03-0.15	0.03-0.15
Maximum output (kg/h)	thirty-five	forty	fifty	fifty-five	fifty-five
Maximum output (kg/h)	forty-five	fifty	sixty	seventy	seventy
Extruder
Screw diameter	Φ forty-five	φ fifty	Φ fifty-five	Φ sixty	Φ sixty-five
Length diameter ratio of screw	28:1/30:1	28:1/30:1	28:1/30:1	28:1/30:1	28:1/30:1
Screw material	Sacm-645/38 crmoala
Barrel material	Sacm-645/38 crmoala
Barrel cooling	370W*1	370W*2	370W*2	370W*2	370W*2
Host power	11kw	15kw*	18.5kw	22kw	22kw
Barrel temperature control	three	three	three	four	four
Average power consumption	15kw	18kw	20kw	25kw	30kw
Die head
Die opening	Φ sixty	Φ eighty	Φ eighty	Φ one hundred	Φ one hundred
temperature control	three	three	three	three	three
Wind ring	one	one	one	one	one

The quality and performance of the equipment continue to improve, and the appearance, technical parameters and characteristics of the machine are subject to change without notice